Viprinet Virtual VPN Hub Setup Instructions
The Viprinet Virtual VPN Hub is targeted for VMWare ESXi. For setup, two sets of files are provided: VMDK files for traditionalists and an OVA file for convenience. The Virtual VPN Hub image can be installed any number of times as it doesn't contain product identity/serial information by itself. However, before a Virtual VPN Hub can actually be used, it needs an identity: The Virtual VPN Hub’s instance ID must be bound to a Viprinet product serial number.
As soon as a Virtual VPN Hub is launched for the first time, it will acquire a product serial number from a Viprinet VirtualCloud server which are redundant HTTPS servers located world-wide. Once this serial number is set, it may be used to assign a subscription license enabling the activation of VPN tunnels. Virtual Hubs have all software features included that are optional for physical hubs. These features as well as installation and serial number acquisition are free; however, any active VPN tunnel as well as any VPN Client will be charged. Subscription licenses for an individual number of concurrently enabled VPN tunnels can be created at the VLM portal (https://support.viprinet.com). These licenses will be automatically downloaded to the Virtual VPN Hub they have been assigned to.
Subscriptions for VPN tunnels and VPN Clients are limited not by number, but by operating life. This means, a Virtual Hub can have an unlimited number of tunnels and clients, but these tunnels and clients will be active for e.g. 30 days only, which is the minimum subscription interval. After this time, subscription needs to be renewed. Else, VPN tunnels and VPN Clients will disconnect. Also, subscription will not be halted if a VPN tunnel or VPN Client are not used all the time while subscription lasts.
Virtual Hubs only work as long as they're able to access VirtualCloud servers. This means that the Virtual Hub must be able to access any IP of Viprinet cloud network servers (*.cloud.vipri.net) using the LAN interface on HTTPS port 443 at all times. In order to detect clones and license violations, the Virtual Hub contacts the VirtualCloud servers regularly to have its serial number verified. This verification process can take up to 30 minutes for the first time after a start-up. If a Virtual Hub cannot connect to any VirtualCloud server after start-up, it will not accept tunnels. If the disconnect lasts longer than 7 days, the Virtual Hub will shut down and no longer accept tunnels.
If the Virtual Hub needs to be suspended for any reason, its serial number will have to be re-validated.
Copying a Virtual VPN Hub
A Virtual Hub may only ever have one specific product serial number. Running multiple identical Virtual Hubs with the same product serial number is a license violation and will result in a shutdown of all duplicate Virtual Hubs!
If you wish to copy an existing Virtual Hub, please make sure that the virtual host assigns a new Virtual Hub ID (SMBIOS UUID) for the copy! The Virtual Hub will then automatically detect that it has been copied, and acquire a new serial number without using the VPN tunnel licenses of the original Virtual Hub.
If you wish to move a Virtual VPN Hub from one virtual host to another, please make sure that the Virtual VPN Hub’s instance ID (SMBIOS UUID) does not change! Only when the ID does not change, will the Virtual VPN Hub keep working seamlessly; otherwise, it will lose its serial number and licenses.
If a Virtual VPN Hub has no active subscriptions for VPN tunnels or VPN Clients and is powered off or suspended, its serial number may expire on next start-up of the Virtual Hub. In this case, the Virtual VPN Hub will automatically acquire a new serial number.
To install a Virtual VPN Hub on a VMWare host, you can either use:
This OVA file will enable import of the appliance on your hypervisor. Or you can use the following virtual drive in order to setup your own VM:
Create a new VM on your ESXi host with the following attributes:
- Guest OS family: Linux
- Guest OS Version: Other 3.x or later Linux (64bit)
- Cores: 2 min.
- Memory: 1GB min.
- Disk image: viprinet_virtualhub.vmdk
- Default SATA controller, no need for the default SCSI one
- 2 network adapters from type VMXNET 3
- First adapter will be the LAN port
- Second adapter will be the WAN port
Important note: Do not rename the files! Otherwise you will have to change the filename inside of viprinet_virtualhub.vmdk manually!
For VMWare, you will not need viprinet_virtualhub.img. This file is used for installation on other virtual hosts.
There are two ways to do the initial setup of the LAN interface. Once the LAN interface is configured, the final setup can be done using the Virtual VPN Hub's web interface.
Use the Viprinet Setup Tool which you can download from the Viprinet website at www.viprinet.com/downloads.
Look for a 01-05900-00-XXXXX serial. "XXXXX" means that no serial number has been assigned yet.
The setup tool must be run on a (virtual or physical) computer located in the same network segment (layer 2/3) as the Virtual Hub.
Once the Virtual VPN Hub has been started, login with "setup/setup" on the tty1 to get into the Viprinet CLI.
You can setup the LAN interface with the following command:
set LANSETTINGS.IPADDRESS <IP>
set LANSETTINGS.NETMASK <NETMASK>
set LANSETTINGS.DEFAULTGATEWAY <GW>
After initial setup, please update the Virtual VPN Hub to the latest RuggedVPN firmware. For the, you may either use the online update (Logging & Maintenance -> Router Firmware Update -> Install available updates now) or you download the latest RuggedVPN firmware manually (click) and install it via Logging & Maintenance -> Router Firmware Update -> Manual Firmware Upload.
You can find the latest Virtual VPN Hub version for AWS (Amazon Web Services) after login at AWS' marketplace (Community AMIs).
- Use Intel PRO/1000 MT Desktop for the NICs
- Reported to work
- Reported to work
- Not working yet
- Linux Integration Services are required, tbd
- On tty2, you will find the Viprinet log.
- Open-vm-tools (an open source version of the VMware guest additions) is shipped along.
To install a Virtual VPN Hub on one of these virtual hosts, you will need the following file:
|Download the Viprinet Virtual VPN Hub Setup Instructions as PDF file||65.73 KB|
|Download Viprinet Virtual VPN Hub product information||163.39 KB|